MSRPGuide

Toilet Replacement Cost (2026)

Updated November 2026

Swapping a toilet in-kind runs $224–$800 installed — HomeAdvisor averages $374, Fixr $450, and Thumbtack puts most jobs near $396. The fixture choice is the swing: a basic two-piece starts around $89, a one-piece runs into four figures, and a smart toilet can carry the whole quote by itself.

A toilet and bathroom in a residential home
An in-kind toilet swap runs $224–$800 installed; the fixture choice is the biggest swing. Photo: Gaurav Dhwaj Khadka, CC BY-SA 4.0.

Cost by fixture type (installed)

TypeInstalled bandNotes
Basic two-piece (in-kind swap)$224–$533The default replacement job — fixture ($89–$413 per Thumbtack) plus install labor
One-piece$500–$1,138HomeAdvisor type average $800; Thumbtack fixture units run $169–$1,138 (upper bound is fixture price — flagged)
Smart toilet / bidet seat$1,199–$4,000Thumbtack smart units $1,199–$6,750; Fixr's high-end installed figure $4,000; standalone bidet seats $400–$2,600, attachments $40–$200
Comfort-heightNo published splitNo publisher broke out the installed band by bowl height — a modest fixture premium, not quoted here (flagged)

Labor, parts, and add-ons

Line itemCostNotes
Replacement labor$NaN–$NaN (Fixr) · $NaN–$NaN (Thumbtack)HomeAdvisor's $373 average sits inside those bands
Wax ring / closet flange (parts)$5–$20Thumbtack: most toilet parts $5–$20 (except the seat)
Supply line / shut-off valve (parts)$5–$20A seized or leaking shut-off may add a plumbing line item — flagged
Old-unit removal / disposal (add-on)$50–$200HomeAdvisor pros charge $50–$200; hauling it yourself saves up to $200 (Fixr)
Relocation / new location (different scope)$3,000 (HA avg) · $NaN–$NaN (Fixr)Moving the toilet is a re-pipe job, not a swap — scope boundary flagged

Pro vs DIY, honestly

An in-kind toilet swap is the most DIY-friendly job in the bathroom: shut the water, drain the bowl, unbolt the flange, replace the wax ring, reset. The DIY band (fixture + parts) runs $$100–$$450, and what you're skipping is pro labor of $$NaN–$NaN (Fixr) to $NaN–$NaN (Thumbtack). But the failure modes are real — a bad wax seal leaks under the floor, and a cracked flange turns into a drain repair (~$670, HomeAdvisor). If the subfloor shows any softness, that's a pro call, not a video-and-a- Saturday call.

When it's a different job entirely

  • Toilet repair — running toilets, fill valves, and flappers are Thumbtack's $149–$355 repair band, a separate scope from replacement.
  • Relocation — moving the fixture is re-piping: $3,000 average (HomeAdvisor) or $1,000–$3,500 first-time (Fixr).
  • Flange repair — a rotted or cracked closet flange is a drain-pipe repair (~$670), not a part swap.
  • Full remodel — if you're opening the floor anyway, price the toilet inside the bathroom-removal scope instead of as a standalone swap.

What actually changes the price

  1. Fixture type — two-piece, one-piece, or smart/bidet; the fixture is the biggest variable.
  2. Rough-in fit — a non-standard rough-in (10" or 14" instead of 12") narrows fixture choices and can raise the price.
  3. Flange condition — a damaged flange adds a repair line.
  4. Shut-off valve state — seized valves add a plumbing line item.
  5. Disposal — $50–$200 if the pro hauls the old unit.
  6. Region — labor varies; the bands here are national.

How to compare quotes

  • Fixture in or out? — some quotes are labor-only with your fixture; some bundle a supplied toilet. Different totals.
  • Confirm disposal — is the old toilet hauled, or left to you?
  • Ask about the flange — a written note on flange condition avoids a mid-job surprise.
  • Check the seat — seats are excluded from the standard parts band; confirm inclusion.

Related cost guides

FAQ

How much does it cost to replace a toilet?

The installed in-kind swap runs $224–$800 with a typical of $374. Per publisher: HomeAdvisor $224–$533 (avg $374), Fixr $250–$800 (avg $450), Thumbtack $254–$615 (most ~$396). Homewyse's calculator estimate is the outlier at $654–$1,189 and is flagged as such — the three publisher bands agree; the calculator does not.

How much does the toilet itself cost?

It depends on the type: a basic two-piece fixture runs $89–$413 (Thumbtack); one-piece fixtures run $169–$1,138 (Thumbtack, upper bound flagged as fixture price); smart/bidet toilets run $1,199–$6,750 as units, with Fixr's high-end installed figure at $4,000. The fixture is the biggest swing factor in the total.

Can I replace a toilet myself, and how much does that save?

DIY is genuinely feasible on an in-kind swap — the fixture and parts run $100–$450 (derived band, flagged). The labor you skip is Fixr's $150–$440 pro-labor band. The catch: a botched wax-ring seat or an over-torqued closet flange turns a $374 average into a repair call.

What parts are involved in a standard replacement?

A wax ring or closet-flange gasket ($5–$20) and a supply line or shut-off valve ($5–$20) are the standard consumables — Thumbtack prices most toilet parts in the $5–$20 range except the seat. A flange repair into the drain pipe is a separate, bigger job (~$670 per HomeAdvisor, flagged as repair scope).

Does the quote include hauling the old toilet away?

Ask. Removal is a $50–$200 add-on per HomeAdvisor, and Fixr notes hauling it yourself saves up to $200. Some installers bundle it; many quote it separately.

How is replacement different from relocating a toilet?

Replacing swaps the fixture in the same location — the $224–$800 band. Relocating the toilet (or a first-time install where none exists) is re-piping work: HomeAdvisor's relocation average is $3,000 and Fixr prices first-time installs at $1,000–$3,500. Different job, different budget.

Sources

Publisher bands are kept separate and never averaged. Homewyse's calculator estimate ($654–$1,189) diverges from the three publisher bands and is flagged, not blended. Derived bands (DIY, one-piece upper bound) are labeled as derived in the dataset. Estimate only — get local written quotes.