Garage Door Costs & Buying Guide (2026)

Updated September 2026

A standard single-car steel garage door runs $550–$1,800 installed, with $993 the published national average (Fixr); a double-car 16×7 steel door runs $800–$3,800, with the honest caveat that the top of that band is likely understated because the double-door labor premium is unpublished. Below are the installed ranges by size and material, the line items that move the total, repair costs at a glance, and the deep dives: how much does a garage door cost and the full repair cost guide.

Drift recheck (2026-09-26): both Fixr editions are still dated January 31, 2025 — the staleness stands, and all 25 Fixr publisher anchors were re-verified EXACT (zero drift). Angi's insulated band ($1,100–$4,200) was re-confirmed verbatim against the May 9, 2026 Wayback snapshot, and the two independently-sourced rows (second-source bands) still bracket the published bands. No band was re-based.

Installed cost at a glance

Each triplet is low–typical–high from the garage-doors dataset, with the unit definition shown honestly — some rows are installed service costs, others materials only.

Door	Cost	Unit definition	Notes
Single steel, 8×7	$550–$993–$1,800	Installed (equipment + labor)	$993 is Fixr's published national average for an installed sectional steel door
Double steel, 16×7	$800–$2,400–$3,800	Installed (equipment + labor)	Composed: materials + single-door labor ($100–$300); double labor premium unpublished — high end likely understated
Single wood, 8×7	$1,000–$3,500	Materials only	Installation labor adds $100–$300; species and carriage styling drive the band
Double wood, 16×7	$2,000–$4,000–$6,000	Materials only	Fixr's worked example: installed custom redwood + opener + glass ≈ $4,118
Single aluminum, 8×7	$500–$1,250–$2,000	Materials only	Rust-resistant; lighter than steel
Double aluminum, 16×7	$800–$2,300–$3,800	Materials only	Full-view glass is the premium configuration
Insulated, double-car	$600–$1,300–$2,000 (Fixr materials basis)	Materials only	Second-source (Angi, installed basis) extends the effective high to $4,200 — bands kept distinct by unit, not averaged

Two rows need the honest framing spelled out. The double-steel high end is composed from materials plus single-door labor because no publisher separates the double-door premium — treat the $3,800 as a floor on the real high end. The insulated row is recorded twice on purpose: Fixr's $600–$2,000 is materials-only and basic insulated doors; Angi's $1,100–$4,200 (Wayback snapshot, May 9, 2026) is installed and includes premium polyurethane/carriage units. They measure different things, so the dataset keeps both bands instead of averaging them.

Repair costs at a glance

Repairs are cheaper than replacement: most fall between $100–$350, with spring replacement the big one. These are the dataset's five repair rows (full bands and the DIY boundary in the repair guide): garage door repair costs.

Repair	Cost (incl. labor)	Notes
Spring replacement (torsion or extension)	$120–$250–$350	Combined band — Fixr does not split torsion vs extension; $250 is the published average for a broken torsion spring. High-tension work — professional replacement strongly advised
Opener repair / motor replacement	$100–$300 (motor $100–$250)	Unit itself $300–$350; full door+opener combo $940–$2,590
Cable / roller / track	$100–$200 (Fixr rows); second-source high $350	Angi cable $100–$350; HomeGuide tracks $125–$300 — effective high extended, bands kept distinct
Panel / section replacement	$150–$500 (repair); $350–$1,500 (section w/ labor); wooden panels up to $1,000	Discontinued models may force full-door fallback
Safety sensor repair / realignment	~$100 (avg); replacement $100–$150	The cheap fix for a door that won't close

What drives installation cost

Material and gauge. Steel is the budget anchor (8×7 materials $450–$1,500); wood runs $1,000–$3,500 single and $2,000–$6,000 double on materials; aluminum sits between ($500–$2,000 single), with full-view glass as its premium configuration.
Size. A 16×7 double costs more than an 8×7 single, but not twice as much — see the honest note under the at-a-glance table.
Insulation. Insulated doors range from $600 to $2,000 depending on the base material (Fixr); premium insulated units reach $4,200 installed (Angi). R-value ranges — not energy-bill claims — are the citable measure.
Windows and decorative hardware. Fixr's high-end worked example ($4,118 installed redwood) includes automatic opener and glass windows.
Old-door removal: $50–$200 when not folded into the estimate (dataset cost drivers).
Opener inclusion. The opener unit runs $300–$350 (chain-drive, belt-drive, direct-drive ($300-$500), jackshaft ($550-$640)), plus electrician time at $40–$120/hr if a new circuit is needed.
Region and wind codes. In Florida wind-borne-debris regions (HVHZ: Miami-Dade and Broward), doors must be large-missile-impact rated and permitted — a structural price factor, not an upsell.

Go deeper

How much does a garage door cost? — the buy-side deep dive: cost by material and size, materials vs installed pricing, opener costs, FAQs, and cited sources.
Garage door repair costs — springs, openers, cables, panels, sensors; when repair beats replacement, and the DIY boundary.
Garage door opener installation cost — installing a new opener: chain, belt, screw, direct-drive and wall-mount jackshaft units by drive type, horsepower and door weight, plus labor, wiring, accessories and premium smart systems.

The opener calculator is live at garage door opener cost calculator; the tables above carry the cited bands for doors and repairs.

Other home projects

Water heaters — installed replacement cost by fuel and type, from 50-gal tanks to tankless and heat pump units.
HVAC — furnace and central AC replacement cost by efficiency tier.
Whole-house standby generators — unit and installed cost for air- and liquid-cooled standby systems.
Roof replacement — installed cost by roof size, material, tear-off, and pitch.
Windows & doors — window replacement cost by frame material, insert versus full-frame, and count.
Bathroom remodel — whole-room installed cost by tier, plus line items from tub to tile.
Driveways & concrete flatwork — driveway cost per square foot installed — asphalt, concrete, gravel, pavers — the surface that ends at the garage door.

FAQ

How much does it cost to install a garage door?

A standard single-car steel door runs $550–$1,800 installed, with $993 the published national average (Fixr). A double-car 16×7 steel door runs $800–$3,800, likely understated at the top because the double-door labor premium is unpublished.

How much more is a double door?

More, but not twice the price. The composed installed band for a 16×7 steel double is $800–$3,800 versus $550–$1,800 single — the derivation is materials plus single-door labor, and Fixr notes double-door labor runs higher without publishing a figure, so treat the high end as understated.

Does an insulated door pay off?

The price is published: insulated doors run $600–$2,000 in materials (Fixr), up to $4,200 installed for premium units (Angi). What is not published is a savings claim — there is no ENERGY STAR category for garage doors and no standardized energy-savings estimate, so this guide cites R-value ranges only.

Sources

Every figure on this page comes from the garage-doors cost dataset, which aggregates published cost guides. Sources as listed in the dataset (retrieved 2026-09-25; drift-rechecked 2026-09-26):

Fixr - Cost to Install a Garage Door (updated Jan 31, 2025) — manual · National avg range $700-$2,000, average $993 installed sectional steel; material table 8x7/16x7 (steel $450-1,500 / $700-3,500; aluminum $500-2,000 / $800-3,800; vinyl $700-1,500 / $950-2,500; composite $750-1,600 / $900-5,000; fiberglass $800-2,000 / $1,300-3,000; glass $900-2,000 / $1,500-4,500; wood $1,000-3,500 / $2,000-6,000); type table (single-panel $400-1,200, tilt-up canopy $500-1,500, tilt-up retractable $600-2,000, sectional $750-2,500, roll-up $850-3,000); configuration table (single $600-1,500, double $800-3,500, custom $1,500-8,000); labor flat $100-300 single; opener unit $300-350; opener types chain/belt/direct $300-500, jackshaft $550-640; electrician $40-120/hr; removal $50-200; replacement total $550-2,200; door+opener $940-2,590; insulated doors $600-2,000; non-insulated steel door w/o install $474; high-end custom redwood w/ opener+glass installed $4,118.
Fixr - Garage Door Repair Cost (updated Jan 31, 2025) — manual · National avg range $150-$350, average $250; torsion spring replacement avg $250; spring/coil replacement band $120-$350 (torsion + extension combined); repair table (lock bar $100-150, sensor $100-150, track $100-175, motor $100-175, opener $100-300, frame $125-400, chain $150-175, strut $150-300, panel $150-500, lintel $150-600); opener parts replacement table (sensor $100-150, rollers $100-150, belt $100-200, cable $100-200, chain $100-200, bearings $100-250, motor $100-250, remote $115-150, coils/springs $120-350, track $150-250, circuit board $150-400, panel $150-1,000); sensor realignment avg ~$100; wooden panel up to $1,000; strut replacement $200-500.
Angi - How Much Does a Garage Door Installation Cost? — manual · NOT FETCHED: Cloudflare bot-wall ('Attention Required!', HTTP interstitial) on 2026-09-25 for both the install and replace article URLs; no figures extractable. Listed only to document the attempted source; contributes no price points.
HomeAdvisor - How Much Does a Garage Door Cost to Install or Repair? — manual · Page fetches (200, ~148KB) but is client-side JS-rendered: no cost figures present in served HTML (only config strings). Wayback returned no archived snapshots. No figures extractable; contributes no price points.
Angi - Garage Door Replacement / Spring-Cable / Opener cost articles ('2026 Data') — manual · ACCESS PATH: live angi.com Cloudflare-403 on 2026-09-25. Replacement-article figures read from the Wayback Machine snapshot 2026-05-09 (web.archive.org/web/20260509001345/https://www.angi.com/articles/garage-door-replacement-cost.htm) [fetched]. Spring/cable/opener figures via search-served captures of angi.com/articles/what-is-garage-door-spring-repair.htm, /garage-door-cable-repair-cost.htm, /how-much-does-garage-door-opener-cost.htm [search-served, 2026-09-25]. Key bands: replacement ~$1,226 avg $753-$1,699/door; steel $650-$3,200; aluminum $600-$2,900; wood $900-$4,500; insulated $1,100-$4,200; single 8x7 $900-$2,500; double 16x7 $1,400-$3,800; opener installed $218-$540 (avg $379); spring torsion $150-$350 / extension $100-$200; cable $100-$350.
HomeGuide - Garage Door Installation & Repair cost pages — manual · Search-served captures of homeguide.com/costs/garage-door-installation-cost, /garage-door-prices, /garage-door-repair-cost (+ spring/sensor pages), 2026-09-25; direct fetch not exercised. Key bands: install total $700-$3,500 (single $700-$2,700, double $1,000-$3,500); labor $200-$500; torsion $150-$350 / extension $120-$200; new opener installed $250-$500; panel $300-$900; sensor align $85-$150; cables $80-$185; tracks $125-$300.
Thumbtack - Garage Doors Prices and Installation (marketplace medians) — manual · Search-served capture, 2026-09-25. Replace/install $417-$1,542 (~$811 median); single 8x7 uninsulated ~$550, insulated ~$700; double uninsulated ~$900, insulated ~$1,100; solid wood ~$3,500-$5,000; opener $206-$700 (~$383).
Home Depot - Garage Door Install & Repair services cost page (first-party retail installer) — manual · Search-served capture, 2026-09-25 (direct fetch 403/bot-gated). Buy+install $1,000-$4,000+; single installed $1,000-$1,800+; double $1,500-$3,600+; custom/insulated $2,500-$6,000+; opener unit $150-$500 + labor $178-$250; haul-away $50-$150; 1-yr labor warranty.

Second-source corroboration: Angi, HomeGuide, Thumbtack, and Home Depot agree on 10 of 12 products; two band updates (insulated-double high $4,200; cable/roller/track high $350) are recorded as their own attributed price points, never averaged. Estimate only — get local written quotes. Figures were last re-verified 2026-09-26 — a drift recheck that reproduced every published band (zero drift).