Garage Door Opener Cost Calculator

Updated October 2026

Installing a garage door opener runs $206–$900 installed (about $380 typical), with premium smart systems at $1,200–$1,500+. Pick the drive type below — every band is the dataset's own, with labor, accessories and removal shown separately.

Garage door opener cost calculator

Pick the drive type you're installing. The result combines the dataset's unit band with installation labor, and shows accessories and removal separately — with confidence flags carried through.

2026 national estimates

Opener drive type

Unit band for this drive: $160–$300–$600 (per opener unit (materials)).

Add-ons (each adds its own band)Installation labor: $60–$72–$85/hr (total $130–$510 over 2–6 hrs)Accessories (per accessory): $15–$60–$150Old-opener removal / disposal: $25–$60–$100

A new electrical circuit adds $40–$120/hr of electrician time when there is no ceiling power.

Estimated cost

$220–$372–$685

low · typical · high. per opener unit (materials). Includes: labor. Drive-type rows are unit (materials); the overall row is installed — units kept distinct.

Door-height pricing (7/8/10 ft) is not published by our sources — weight and horsepower drive the choice, so no height band is shown.

No quality flags on this row.

How the estimate works

Each drive type maps to a costed product in our dataset, and the calculator combines that product's unit band with the labor band (and any accessories or removal you add) — the dataset's own figures, not a model. Drive-type rows are unit (materials); the overall row is installed, so the units stay labelled and are never composed.

Two honest limits: door height is not priced by the published sources (weight and horsepower drive the unit choice, not 7/8/10 ft), and a new electrical circuit adds $40–$120/hr of electrician time when there is no ceiling power — neither is folded into the band.

Read the opener installation cost guide for the drive-type table, horsepower sizing, labor and accessories, and FAQs.

Sources

Thumbtack - Garage Door Opener Installation Cost (updated Jul 1, 2026) — high reliability · Range $206-$700 avg $383 (low $84/high $1,576); parts: chain $150-$300, belt $200-$250, screw $190-$260, direct $250-$300, remote $30-$40, keypad $30-$60, lighting $50-$100, sensors $50-$100. Fetched 2026-10-02 (200, 174,490 B).
HomeAdvisor - Cost to Install a Garage Door Opener (updated Jun 20, 2026) — high reliability · Range $218-$540 avg $379; unit $100-$900+; chain $150-$250, belt $160-$350, screw $150-$300, direct $280-$500; labor $60-$80/hr, total $130-$510 (2-6 hrs); 1/2 hp ~$100, 2 hp $300-$400; commercial to $1,500. Fetched 2026-10-02 (200, 391,097 B).
Networx - Cost to Install a Garage Door Opener (2026) — high reliability · Installed $300-$900+ typical, mid $500-$800, higher-end $1,200-$1,500+; chain $150-$300, belt $250-$600, screw $180-$350, direct $280-$500, wall-mount/jackshaft $300-$800+; labor $120-$400+; accessories $20-$150+, removal $25-$100+. Fetched 2026-10-02 (200, 48,686 B).
Bob Vila - Garage Door Opener Installation Cost (cites HomeAdvisor/Angi) — high reliability · Range $218-$525 avg $368; parts $150-$520; labor $65-$85/hr; belt $160-$450, chain $150-$250, direct $280-$500, jackshaft $250-$515, screw $200-$500; battery backup $100; lighting $50-$150; replacement $225-$300 (full job $525). Fetched 2026-10-02 (200, 230,615 B).

Estimate only — get local written quotes. Figures are national bands from public cost guides (Thumbtack, HomeAdvisor, Networx, Bob Vila) as of October 2026, not verified contractor pricing. Drive-type and horsepower rows are partly single-publisher; door-height pricing is not published and is not invented; per-source bands are kept separate, never averaged.